A Short Guide Written by Plumbing Professionals
Whether your pipes and fittings are almost new or they were installed a long time ago, leaks may occur. This is why PVC pipelines need to be tested on a regular basis to make sure there are no leaks to cause problems.Your local plumber can charge you a very moderate fee to inspect your pipes a couple of times per year. Despite this, many people still prefer to do this job themselves and save some money. In fact, very few people realize this but even new pipes need to be tested, immediately after they have been installed. When pressure testing PVC, it is important to wait until all the PVC cement is cured in the joints.
Do you want to learn more about why testing is necessary and how it is done? Continue reading and you will learn some secrets, which Brown Plumbing Co., of Cedar Rapids IA, decided to share with you today!
There are two ways to test PVC pressure:
- with water
- with air
Air pressure tests are quite dangerous and should only be done by a professional plumber. If you decide you can do it alone, bear in mind that you are putting yourself at great risk. If you, however, want to take this risk then you better start with locating the lowest point in the PVC line.
This point will be tested first. Continue then with the remaining pipes and connectors, by dividing them in 100-foot sections, to make the inspection/testing easier. Disconnect the water section by section, in order to make the checks.
If any leaks are found, the leaky joint or pipe should be removed and replaced. If you cannot do this yourself, you may always call a plumber to help you. Our plumbing repair teams are just a phone call away, and can perform any type of inspection or repairs, you may need. Don't hesitate to contact us, if you need urgent plumbing assistance!